How to install the solid wood combination wardrobe and what are the precautions?
[ Chinese wardrobe net ] [Chinese wardrobe net ] The combination wardrobe is a finished product, which has a good viewing effect and can enhance the overall decorative visual sense of the family space. For those who pursue fashion, the combination wardrobe is a good choice. So how many installation methods and precautions for solid wood combination wardrobes?
Introduction to the installation method of solid wood combination wardrobe
The installation of the solid wood combination wardrobe is generally not too complicated. In order to let the customer know clearly how to install it, the manufacturer has minimized the installation steps, and the interfaces are also prepared in advance. The user only needs to follow the installation diagram step by step. It is ok, pay special attention to the installation sequence and correctly install the components to the appropriate positions.
When installing a solid wood combination wardrobe, first make sure the bottom plate is secure. It is very important to lay a good foundation. If the bottom is not secure, the structure of the entire wardrobe will be unstable. When installing, pay attention to the interface to be aligned, the installation is stable, the hand shake will not cause shaking, the bottom generally has drawers, you can not install first, first determine the frame, reserve the installation space.
Solid wood combination wardrobe installation precautions
After the bottom of the solid wood combination wardrobe is installed, then install the back panel. Pay attention to keep the back panel and the bottom plate at a right angle of 90 degrees. Do not tilt. It is best to measure it carefully with a measuring tool to avoid errors. After installing the backboard, it is necessary to install the side panels and the top panel of the solid wood combination wardrobe. One side of the side panel is connected to the back panel, and one side is connected to the bottom panel. The panel and the panel are at a right angle of ninety degrees. The top panel is installed on the top of the wardrobe. The interface is stable and it is firmly fixed on the top.
Now, the general frame of the solid wood combination wardrobe has been established, and finally the remaining parts such as cabinet doors, laminates, clothes rails, clothes trays, drawers, etc. are installed. These combination wardrobe installation drawings are specifically marked, as long as they are reserved according to the merchant. The wardrobe space will be installed one by one.
Fixed Single Desk And Chair,School Table Desk,Study Chair Set,Classroom Desk And Chair
AU-PINY FURNITURE CO., LTD , https://www.au-piny.com