Decorative veneer veneer plywood (referred to as decorative plate) is commonly known as “ply panel†on the market. The ash veneer panel is commonly known as “curved plateâ€. The coffin veneer is commonly known as “榉 榉 â€â€. Decorative panels are commonly used decorative materials for home decoration. Choose a high-quality decorative board, its stable and reliable structural decoration will make the room shine; in case the consumer chooses the inferior decorative board, the surface will bulge and crack. Choosing high-quality decorative panels has become a concern of consumers.
Buy decorative boards have rules to follow
1. Recognize the difference between artificial veneer veneer and natural wood veneer veneer: the texture of the former is basically straight texture, the texture pattern has rules; while the latter is natural wood pattern, the natural variability of the literary and artistic patterns is relatively large and irregular.
2. Good decoration: the appearance of the decorative board should have a good aesthetic, the material should be fine and uniform, and the color is clear. The wood grain is beautiful, the texture of the matching board and the parquet should be arranged according to a certain regularity, the wood color is similar, and the seam is almost parallel to the edge of the board.
3. The surface should be free of obvious defects: the surface of the selected decorative board should be smooth, free of burr groove marks and planing knife marks; there should be no penetration phenomenon and board surface contamination (such as local yellowing and blackening); Cracks, cracks, no knots, skins, resin capsules and gum roads; the natural warpage of the whole board should be as small as possible to avoid the sand penetration phenomenon caused by improper operation of the sanding process and the substrate.
4. The structure of the rubber layer is stable and there is no opening phenomenon: it should be noted that there is no bulging or delamination between the surface veneer and the substrate and between the layers inside the substrate.
5. Slip test for gluing strength: This method is the most intuitive way to check the gluing strength. The sharp flat blade is used to slide along the rubber layer. If the rubber layer is broken and the wood is broken, the bonding strength is poor.
6. To choose a plate with low formaldehyde emission: when choosing, avoid decorative plates with pungent odor. Because the greater the smell, the higher the amount of formaldehyde released, the more harmful the pollution, and the greater the harmfulness.
7. Choose products with clear production enterprises: Most products with clear factory name, factory address, trademark, performance table - now. For example, “Fujin†red enamel veneer produced by Tianjin Fujin Wood Industry, “Houyou†曲柳 veneer produced by Shandong Heyou Group, and “Jianghai†artificial red enamel veneer decorative board produced by China Jianghai Wood Industry Co., Ltd. The performance of the item is good and consumers can choose it first.
Tattoo Stickers, Body Tattoo Stickers, Nail Tattoo Stickers, Tattoo Stickers For Kids
GST ENTERPRISE LTD , http://www.gsttoy.com