Electronic tags are also called radio frequency tags, transponders, and data carriers; it consists of a tag antenna and a tag chip. The biggest feature of the electronic tag system is the use of radio frequency technology for non-contact identification and wireless communication. Therefore, multiple tags can be identified simultaneously. Due to its characteristics, electronic tags and high-speed electronic tags are widely used in many fields. Of course, the development in the field of label printing is also very impressive.
With the continuous development of China's economy and the increasing level of consumption, electronic commodities have been increasingly used in all areas of our lives. China has become the world's largest consumer market for electronic products. In this environment, the consumption of electronic labels is increasing, and the market share in the field of label printing in China is also increasing.
At present, the vast majority of label printing companies still use manual detection methods for electronic labels. This method not only has a slow detection speed but is also prone to missed inspections, resulting in unqualified products leaving the factory.
On the one hand, the quality standards of electronic tags are stricter, and some minor defects will cause the labels to fail. On the other hand, many electronic tags have a relatively small area, so the printed fonts and graphics are relatively small, and the human eye often cannot Identify these small defects and lead to missed inspections.
In the daily production process of label printing companies, customer complaints caused by missing electronic tags often occur. Many label printing companies have to reduce the manual inspection speed which is not too fast in order to improve the product qualification rate and reduce customer complaints, which makes the electronic label inspection process quite slow, which seriously affects the production efficiency of the enterprise.
With the development of China's economy, the cost of human resources continues to increase. How to improve production efficiency and improve product quality has become a difficult problem for label printing enterprise managers. The relatively low efficiency of label printing enterprises and the relatively large number of people is the quality inspection department, so the use of equipment instead of labor, on the one hand, frees the workers from heavy manual labor, on the other hand, improves production efficiency. For these two considerations, many label printing companies have begun to try automatic label detection equipment.
According to the analysis report "Foresight and Investment Strategic Planning of China's Electronic Label Industry Market 2014-2018" released by the Foresight Industry Research Institute: I believe that automatic label inspection equipment will become the mainstream method of label inspection in the near future, but we also need to know clearly By now, because China's label printing industry is still at a relatively low development stage, in the future a long period of time, manual detection methods will still have a place. Manual detection methods and automatic detection methods will coexist in the field of label detection for a long time.
The RFID system composed of electronic tags, readers, antennas and application software is directly connected to the corresponding management information system. Each item can be accurately tracked. This comprehensive information management system can bring many benefits to customers, including real-time data collection, secure data access channels, and offline access to all product information. Wait. In foreign countries, RFID technology has been widely used in many fields such as industrial automation and commercial automation.
The oldest knife-making process, which is made by hand, is to exchange sweat for quality. The knife worker hammers and forges the red-burning steel blocks, and then folds them up and hammers them after hammering them open, so that they are repeated dozens of times. The forged knife is characterized by a knife support and a knife root. The knife support is the middle part connecting the knife edge and the knife handle, and the knife root is the part of the knife handle blocking the knife blade. Integral blade is the most ideal tool in forging, which means a real seamless tool holding mode.
Utility knife, Utility kitchen knife 5 inch, 6-inch utility knife
Liveon Industrial Co.,Ltd. , https://www.liveonkitchen.com