What should I pay attention to when buying furniture veneer veneers?
The veneer is a kind of veneer material widely used for the surface of wardrobes, cabinets, dining tables and chairs. It can save wood, provide a variety of wood grain and size selection, and is one of the indispensable materials in home decoration. .
Generally speaking, the veneer refers to the plate type, the material is wood or fiber, which can not be used as the ground. The misunderstible veneer brick can be understood as a tile and the wall surface can be used.
Walnut veneer
Commonly used wood decorative panels usually have dimensions of 2440*1220, 1000*2000, 1220*2000, 1200*3000. The thickness is usually 3 mm, but there are some other thicknesses of 0.9mm/1.2mm/1.5mm/1.8mm/2.0mm/2.7mm/3.0mm/3.6mm, etc. The thicker the better the performance, the more solid wood after painting True, the texture is clearer, the color is bright and the saturation is good.
Related reading: Selection guide for the veneer
When choosing a veneer, you should pay attention to the following points:
(1) First, select a sheet with a low formaldehyde emission. It can be smelled by the nose, and the smell is large, indicating that the formaldehyde is released in a high amount, the pollution is severe, and the harm is great. On the other hand, the environmental protection test certificate is also not negligible. Although the environmental protection plate will be more expensive in terms of price, but long-term use, not only do not have to worry about household pollution, the cost of long-term flattening can be neglected.
(2) No glue opening phenomenon, the rubber layer structure is stable. It should be noted that there should be no bulging or delamination between the surface veneer and the substrate and between the layers inside the substrate.
(3) The difference between natural board and technology board: the former is a natural wood pattern, the natural variability of the texture pattern is relatively large and irregular; while the texture of the latter is basically straight texture, and the texture pattern has rules.
(4) The surface should be free of obvious defects and the surface should be smooth. No burr groove marks and planing knife marks, there should be no penetration phenomenon and board surface contamination; cracks on the surface, knots, skins, resin capsules and gum lanes should not be selected.
(5) The decoration is better, the appearance should have a better aesthetic, the material should be fine and uniform, the color is clear, the wood color is similar, and the wood grain is beautiful.
(6) Observe the veneer (skin) and see the thickness of the veneer. The thinner the better the performance, the more solid the wood feels after painting, the clearer the texture, the better the color and saturation.
(7) Products with clear factory names, factory sites, and trademarks should be purchased, and documents such as test reports and certificates should be obtained.
Kangerjian round type LED Operating Light LED bulb from OSRAM ,do not engender infrared ray and ultraviolet radiation, it doesn`t have the temperature rise and tissue damage caused by halogen shadowless light, can accelerate the wound healing after surgery, and has no Radiation pollution
Variety of Surgical environment lighting mode: bright, normal, endoscopic lighting mode.
Round Type Operating Light,LED Surgery Light,Led Surgery Ceiling Lamp,Surgical Shadowless Lamp
Shandong qufu healthyou Medical Technology co.,Ltd , https://www.kangerjianmedical.com