How to use the digital constant temperature water bath:
1. When using a digital thermostatic water bath, it must be added to the water pot first, and can be added according to the required capacity, but not lower than the height of the heating tube.
2. The digital display constant temperature water bath is connected to the external power supply, turn on the power switch, and tune the required temperature: 1 Turn the temperature “set-temperature measurement†selection switch to the setting end, adjust the temperature adjustment knob, and display the set temperature value digitally. ; 2 The temperature "set - temperature measurement" selection switch is turned to the temperature measurement end, and the digital display shows the actual temperature of the working water tank. (The yellow indicator light indicates the heater is working.)
3. Adjust the speed control knob and raise it to the required speed.
4. Use the digital display constant temperature water bath, adjust the speed control and temperature adjustment knob to the minimum value, and turn off the power switch to cut off the power.
Digital thermostatic water bath precautions:
1. When using the digital constant temperature water bath, the outer casing should be properly grounded to avoid accidents;
2. It is forbidden to enter various solutions into the control room to avoid damage to the host;
3. It is forbidden to heat water in the water tank to avoid burning the heating pipe;
4, the stirring slurry must be submerged into the water before it can work;
5. When the digital constant temperature water bath fails, please understand the master of the electrical appliance or notify the factory to repair.
Cartoon Eraser,Cartoon Cute Pen Shaped Eraser,Cartoon Animal Erasers,Cartoon Logo Printing Eraser
Shaoxing Daling Stationery Co., Ltd. , https://www.sxdaling.com