According to Jiang Wu, chief engineer of the Sacred Group Marketing Service Center, the wooden floor paving standards have clear requirements for the installation quality in the industry. This is a good thing for consumers, and it is also a good thing for the company. Service is good, enhance the competitiveness of enterprises and promote consumers' deep understanding of the connotation of brand services is the core of building a good service brand. For the new wooden floor covering standards, Jiang Wu engineers provided consumers with several simple methods to check whether the wooden floor covering was qualified.
1. The accessory system used must be a qualified product. Consumers have the right to request the manufacturer to provide product information such as the product certificate manufacturer of the accessory product.
Second, the floor mat is the most common accessory. The national standard stipulates that his thickness must be greater than 2mm. The floor mat should be elastic and resilient when pressed by hand. The plastic film on the upper and lower surfaces must have certain toughness and cannot be easily torn.
Third, the maximum clearance between the baseboard product and the floor product should be less than 3mm. Use a coin of 1 yuan to plug it. If it is inserted more than 2, the gap may be too large.
Fourth, the paving standard requirements, the height difference of the product can not be greater than 0.2mm. You can find a business card and push it at the seam of the floor. If it is blocked, it may exceed the allowable range.
5. Use the back of the wallpaper blade to insert the horizontal and vertical seams on the floor. If you can insert it, it may indicate that the gap is too large.
6. For the amount of floor, the national standard stipulates that the loss rate should not exceed 5%. The consumption can be based on the measured area of ​​the room.
Kraft Paper Bag,Printed Bread Bag,Kraft Pouch Stand Up,Tea Bag Kraft Paper Bag
Guangdong Danqing Printing Co., Ltd. , https://www.spoutpouchfactory.com