How to replace the Bluetooth module - Bluetooth printer

How to Replace the Bluetooth Module in a Bluetooth Printer

Follow these steps carefully to replace the Bluetooth module in your Bluetooth printer:

1. Start by unscrewing the screw located at the back of the printer. Make sure you have a small screwdriver handy.

2. Carefully open the top cover on the side where the power button is located. This will give you access to the internal components of the printer.

3. Once the cover is open, you should be able to see the Bluetooth module. It is usually connected to the main board via a small cable or connector.

4. Gently remove the old Bluetooth module from its slot. Be careful not to damage any surrounding components or cables.

5. Insert the new Bluetooth module into the same slot, ensuring that it is properly aligned and securely connected.