When we use the Feiteng 3.1 software to discharge newspapers, we often encounter such a situation: the proofs after the final draft are not compatible with the film from the photo machine. What is going on here?
Everyone knows that when using Feiteng software in the network group version, using the programming command, a PS file and a FIT file will be automatically generated on the network server, and a backup will be generated in the local disk. The PS file is for proofing and filming. Once generated, it cannot be modified. If you want to modify it, you can only modify it on the FIT file with the same name, and then edit the distribution. At this time, the computer will overwrite the original PS file and generate a new PS file. At the same time, a backup is generated in the local disk. Under normal circumstances, the PS file on the web server is consistent with the FIT file.
Under what circumstances will there be an error that the sample does not match the film from the photo machine? Maybe everyone will have this situation when the network version is changed. After changing the proofs, press the edit order command, and the computer will pop up the prompt “Failed to save the FIT fileâ€. If such a prompt appears, there is a possibility that the sample does not match the film from the photo machine. This is because after the computer pops up the "Failed to save the FIT file" prompt, you then press the release line until the prompt "Save failed FIT file failed", and then exit the layout. At this time, the PS file on the network has been modified, but the saved FIT file is still not modified. The sample that was printed is inconsistent with the actual file in the computer. If you don't make changes later, you won't go wrong. But in case you still need to modify it, you will definitely get the above error. Because you made changes on the file that did not save the modified result the previous time, in other words, you made the changes based on the error file.
So what should we do? The first thing to do is to figure out under what circumstances the computer will pop up the "Failed to save the FIT file" prompt. After many experiments, we found that when two computers open the same layout at the same time, one of them enters the layout through the editing program to perform the sample modification operation, and the other is directly enters the layout from the server disk, and enters the layout through the editing program to perform the sample modification operation. After the computer is modified, it will pop up the prompt “Failed to save the FIT file†when pressing the editing and dispatching.
Knowing this situation, we stipulate that no one should open any layout without any group operation. If you encounter the prompt “Failed to save the FIT fileâ€, please tell other computer operators to quit the layout. At this time, you should not directly edit the layout, but modify the layout (such as the unused flowers or The small text block is moved to a position or deleted, etc., and then the editing and dispatching is performed, so that the result of the operation is correct.
When we use the Feiteng 3.1 software to discharge newspapers, we often encounter such a situation: the proofs after the final draft are not compatible with the film from the photo machine. What is going on here?
Everyone knows that when using Feiteng software in the network group version, using the programming command, a PS file and a FIT file will be automatically generated on the network server, and a backup will be generated in the local disk. The PS file is for proofing and filming. Once generated, it cannot be modified. If you want to modify it, you can only modify it on the FIT file with the same name, and then edit the distribution. At this time, the computer will overwrite the original PS file and generate a new PS file. At the same time, a backup is generated in the local disk. Under normal circumstances, the PS file on the web server is consistent with the FIT file.
Under what circumstances will there be an error that the sample does not match the film from the photo machine? Maybe everyone will have this situation when the network version is changed. After changing the proofs, press the edit order command, and the computer will pop up the prompt “Failed to save the FIT fileâ€. If such a prompt appears, there is a possibility that the sample does not match the film from the photo machine. This is because after the computer pops up the "Failed to save the FIT file" prompt, you then press the release line until the prompt "Save failed FIT file failed", and then exit the layout. At this time, the PS file on the network has been modified, but the saved FIT file is still not modified. The sample that was printed is inconsistent with the actual file in the computer. If you don't make changes later, you won't go wrong. But in case you still need to modify it, you will definitely get the above error. Because you made changes on the file that did not save the modified result the previous time, in other words, you made the changes based on the error file.
So what should we do? The first thing to do is to figure out under what circumstances the computer will pop up the "Failed to save the FIT file" prompt. After many experiments, we found that when two computers open the same layout at the same time, one of them enters the layout through the editing program to perform the sample modification operation, and the other is directly enters the layout from the server disk, and enters the layout through the editing program to perform the sample modification operation. After the computer is modified, it will pop up the prompt “Failed to save the FIT file†when pressing the editing and dispatching.
Knowing this situation, we stipulate that no one should open any layout without any group operation. If you encounter the prompt “Failed to save the FIT fileâ€, please tell other computer operators to quit the layout. At this time, you should not directly edit the layout, but modify the layout (such as the unused flowers or The small text block is moved to a position or deleted, etc., and then the editing and dispatching is performed, so that the result of the operation is correct.
Fabric Roller Curtain,Fabric Roll Up Blinds,Fabric Roller Blinds For Windows,Lace Roller Blinds