About the maintenance of high and low temperature impact test chamber
Any precision instrument must not only be operated properly, placed properly, but also maintained properly. The high and low temperature impact test chamber is a high-end testing equipment in the environmental test equipment industry. Properly maintaining and maintaining the high and low temperature impact test chamber can Increase the service life of equipment, reduce machine failures, improve work efficiency and improve the test results.
Equipment maintenance must implement the principle of "emphasis on maintenance and prevention, and prevention as the first priority". Regular maintenance and compulsory maintenance must be carried out to properly handle the relationship between use, maintenance and repair. It is not allowed to use only maintenance and repair;
The maintenance machinery of the high and low temperature impact test chamber must ensure the quality, and it should be carried out one by one according to the specified items and requirements. Maintenance items, maintenance quality and problems found in maintenance should be recorded, call Beijing Yashilin Technical Department;
Maintenance personnel and maintenance department should achieve "three inspections and one handover (self-inspection, mutual inspection, full-time inspection and one-time check)", constantly sum up maintenance experience and improve maintenance quality.
Each team must do a good job of maintaining all types of machinery according to the mechanical maintenance regulations and maintenance categories, and it must not be unreasonably prolonged. In special cases, the maintenance can only be postponed after being approved by the special manager, but generally it should not exceed half of the specified maintenance interval;
High and low temperature impact test box inspection and maintenance list
Project status time
The condenser is not clean and affects the heat dissipation at any time
Regular maintenance every month
Clean the inner box at any time before operation
Regular maintenance every three months
Clean the machine regularly for maintenance every six months
Clean the power distribution room for regular maintenance every six months
Check the cold oil mirror before operation
Check the high pressure gauge at any time before operation
Technical Information of Beijing Yashilin Testing Equipment Co., Ltd.
The so-called PP Bag is made with polypropylene as the material of plastic bags, its general use of color printing, offset printing process, bright colors, generally do more woven bags, in addition, PP bag is tensile polypropylene plastic, belongs to a thermoplastic.It is non-toxic, tasteless and transparent.Easy to burn, flame for melting dripping, yellow under blue, from the fire smoke less, continue to burn, more used for cosmetics, food, toys, clothing, stationery, electronics, hardware products and other industries packaging.The color is transparent, good quality, good toughness, because of its hard brittle material decided that it is only suitable for packaging is not suitable for load-bearing.
Pp Plastic Bag,Pp Handbag,Pp Shopping Bag,Polypropylene Packaging Bags
Wenzhou Shandao Electronic Commerce Co., Ltd. , https://www.reusablebaglife.com