Shanghai Tingyi Instrument & Meter Technology Co., Ltd. is a high-tech enterprise dedicated to the development and production of intelligent material testing equipment, including universal material testing machines. The company holds an international standard product certificate issued by the National Standardization Management Committee, ensuring its products meet global quality benchmarks. As one of the leading domestic manufacturers in the testing machine industry, the company has a team of skilled technical engineers and offers a wide range of advanced testing solutions.
The product line includes all-digital electronic universal testing machines, electro-hydraulic servo universal testing machines, computer-controlled vulcanizing instruments, Mooney viscosity meters, electronic tensile testing machines, impact testing machines, laboratory flat vulcanizing machines, and comprehensive rubber and plastic testing systems. With over 150 varieties across eight major categories, the company also specializes in custom-made testing machines tailored to specific user requirements.
One of their key products is the horizontal tensile testing machine, which is an upgraded version of the traditional electronic universal testing machine. Designed for large-scale testing, it requires careful operation to ensure accurate results and prevent damage. To use the horizontal tensile testing machine correctly, follow these eight important guidelines:
1. **Do not press the "Start" button before beginning the test** — always confirm that the setup is complete and ready for testing.
2. **Check the load value when entering the program** — if there's any abnormality or if the load value differs from the previous reading, stop the test and refer to the troubleshooting guide. The load value should be close to zero upon entering the test interface.
3. **Use the cylinder reset button carefully** — raise or lower the piston to the desired position. If the displayed displacement is higher than the set point, the piston will drop; otherwise, it will rise. Always verify that the actual position matches the display to avoid misalignment.
4. **Avoid zeroing the load after clamping the sample** — this can affect the accuracy of your readings.
5. **Handle the extensometer with care** — remove the positioning pin before zeroing, and reinsert it after use to protect the device from damage due to overload.
6. **Immediately stop the test after the sample breaks** — if the system does not automatically end the test, click the "Stop" button right away to prevent further damage.
7. **Turn off the system properly** — after finishing the test, shut down the Windows operating system first, then turn off the oil pump and allow the cylinder to move to the lowest position.
8. **Be cautious with the computer during movement** — avoid unplugging any cables while the system is in motion to prevent data loss or hardware issues.
By following these best practices, users can ensure safe, accurate, and efficient operation of the horizontal tensile testing machine, maximizing both performance and longevity of the equipment.
PVC enamel
Pvc Enamel,Cartoon Pendant,Cartoon Pendant Processing,Customized Cartoon Ornaments
DONGGUAN TETSUMET TECHNOLOGY CO.,LTD , https://www.tetsumet.com