Buy the whole wardrobe to see the edge of the board edge hardware

[ Chinese wardrobe net ] The whole wardrobe is slowly becoming an essential storage tool in people's homes. It bears the placement of all the wardrobes in the home. So what should we pay attention to when purchasing the wardrobe? In what ways can we determine that the wardrobe we want to buy is a good wardrobe? Xiaobian summed up, when buying the whole wardrobe, we should pay attention to the three key factors of sheet metal, edge sealing and hardware.

The first is the board. The board is the main component of the overall wardrobe, and its quality directly determines the quality of the wardrobe. The wardrobe panels on the market mainly use wood-based panels, and there are few solid wood panels. Wood-based panels are further divided into splints, particle boards, and fiberboard. Among them, fiberboard has high density, medium density and low density. MDF: It is made of wood fiber or other plant fiber. After cooking, it is ground into fine fiber and added with appropriate amount of adhesive. It is pressed under a certain temperature and pressure. High density and high strength. Particle board: the proverb "particle board", which is processed into fine particle shavings and added with appropriate amount of glue, pressed at a certain temperature and pressure. The density is not high and the strength is small.

The plate is full and thick, and the density is sufficient to ensure the durability of the wardrobe. The cabinet board for wardrobes must have the national authoritative test report, and must comply with the national mandatory standard GB18584-2001. The formaldehyde emission is ≤1.5mg/L, and the water content is between 5-11. Whether the plate is strong or not determines the cabinet. The service life, the thickness standard should be 18cm, which is not easy to deform and has good stability. The density standard is 0.6-0.9g/cm3, and the service life should be more than 15 years.

Followed by the edge banding, the edge of the board is an important standard for the fineness of the wardrobe process. The process directly affects the quality of the wardrobe, and whether there is any unevenness and lifting phenomenon on the edge of the seal, the good edge seal should be tightly stitched with the whole piece of sheet. The edge of the machine is generally uniform, no black lines and sawtooth marks are visible, and the hand-sealing will be somewhat rough and will hang the clothes.

Finally, the hardware accessories, the pulley of the brand wardrobe is generally equipped with balls, with non-drying grease, so the push and pull is smooth and flexible. And with such a pulley, the weight of the wardrobe is large, and it is more resistant to pressure and wear. At the same time, good pulleys are often designed with anti-slip devices to ensure the safety of the doors when sliding. In addition, in the acceptance of the overall wardrobe, you need to pay attention to the following aspects, one is whether the cabinet panel has no color difference; the second is the gap at the joint, generally the gap should be less than 0.1mm; the third is the pants rack with or without anti-slip treatment, After the anti-slip treatment, the pants can be prevented from slipping when the pants rack is pulled; the fourth is that the clothes rails must be integrally formed, so that they can bear enough weight; the fifth is that the drawers and the drawer work must be meticulous and smooth, and the structure is firm.

Made of supreme quality EVA material, water resistant, moisture proofing and dust-proof.
Comfortable fuzzy lining, soft shock absorbing protection against minor bumps drops and shocks, reduce damages caused by accidentally bumping.
Durable metal zipper, smooth but strong 360.degree zipper, provides durability and a long-lasting performance.

Eva Laptop Case

Eva Ipad Case,Eva Laptop Case,Eva Tablet Case,Eva Computer Case

Shenzhen Guohui Craft Products Co.,Ltd. , https://www.evacarrycase.com