The molded wooden door is mechanically pressed from two high-density fiber molded door panels with styling and simulated wood grain. Since the door panel is hollow, the natural sound insulation effect is worse than that of the solid wood door, and it cannot be wet.
The molded wooden door is decorated with wood veneer and brushed with “varnishâ€, which maintains the natural texture of the wood. It can also be used for panel mosaic, which is beautiful, lively and economical. The molded door also has the characteristics of moisture proof, small expansion coefficient and deformation resistance. After a period of use, surface cracking and oxidative discoloration do not occur.
Molded wooden doors are more affordable than solid wood doors and are safe and convenient, and are favored by middle-income families. The Sichuan molded wooden door is mechanically pressed from two high-density fiber molded door panels with styling and simulated wood grain. Since the door panel is hollow, the natural sound insulation effect is worse than that of the solid wood door, and it cannot be wet. The molded wooden door is decorated with wood veneer and brushed with “varnishâ€, which maintains the natural texture of the wood. It can also be used for panel mosaic, which is beautiful, lively and economical. The molded door also has the characteristics of moisture proof, small expansion coefficient and deformation resistance. After a period of use, surface cracking and oxidative discoloration do not occur. At present, the molded wooden doors on the market are mostly at 380-500 yuan.
The construction process of the molded door is relatively simple, and it seems that there is no thick and beautiful solid wood door. This type of door is mainly used in places where balconies, storage rooms, etc. are not frequently opened. It is very important to have a problem with the molded door, that is, the release of harmful gases may cause indoor pollution. Mainly used for engineering, and it has not been used in engineering in recent years.
The plywood door is made by splicing the wood into a door frame and then nailing the plywood on both sides of the frame. The three plywoods are extremely wood, white ash, eucalyptus, ash, teak, oak, etc., with a thickness of about 4-6 mm. The three plywood can be folded or pinned. The plywood door is simple and smooth, which meets the requirements of sanitation and hygiene. However, the quality of the plywood depends on the quality of the glue. It is usually easy to degumming due to moisture, and the sun is easy to crack. It is not suitable to use the outer door.
If it is a plywood door with mixed water effect, it can be directly pasted with three plywood, but the quality of the three plywood is not very good now, so nowadays it is replaced by red or red walnut, and the two veneers are cheaper than The three plywood is not much more expensive. Secondly, the flatness of the veneer is much better than that of the splint. The paint construction is also easy.
Disadvantages of the plywood door:
1. The process door is factory-processed, and the door cover is made on site. If it is a clear water door, there is a possibility of color difference between the door cover and the door. Even with the same color of the veneer, there must be a color difference between the different brands, and some color differences are still very serious. If you are afraid of chromatic aberration, you can use the designated brand of veneer when ordering the craft door at JS. For example, if your door is made of a purple rose veneer, you can specify that the JS that makes the door also uses this brand, the color of the veneer.
2, poor sound insulation, Sichuan craft wooden doors are mostly hollow, the sound is very easy to penetrate, in order to achieve better sound insulation, you must fill the frame with wooden blocks. The hollow craft door is very light, and a woman with little strength can afford it.
Flower Essential Oil,Rose Essential Oil,Lavender Oil,Rosemary Oil
Ji'An ZhongXiang Natural Plants Co.,Ltd. , https://www.zxessentialoil.com