A waste toothpaste tube is rolled into a flat plate, and then the plate is cut into grains (silk), the paint film is removed, the cold water is rinsed, the drying, and the wind is selected. The aluminum recovery of the aluminum (silk) product is performed. Process. The process has fewer processes, high aluminum recovery, low cost, and significant economic benefits. The device is composed of a vertical roller press and a rotary granulator. After the roller press presses the waste toothpaste tube roll into a plate, the feeding mechanism on the pelletizer intermittently feeds the plate into the pelletizing area and uses the equipment. The rotary motion of a movable blade body with a movable blade generates a shearing action of a movable blade and a static blade, and shears the plate into pellets. The device can be continuously mass-produced and has high production efficiency.
Reproduced from: Chinalco