Tape thermal shock box how to prevent static electricity?

With the development of society, the demand of customers for tape hot and cold shock boxes is constantly rising. So how does the tape heat and cold shock box prevent static electricity? What are the countermeasures to prevent static electricity? Haida Xiaobian below will solve this problem for everyone.

First, the harm caused by static electricity:

1. During grinding operation, electrostatic charges can affect the finished product to achieve good quality;

2, electrostatic charge can cause the fiber to stand upright;

3, the results produce defective products.

4. The use of chutes or pipes to transport materials will accumulate static charges, causing the material to adhere to the inner walls of the chute or pipe, which can cause plugging.

5. Fire or explosion caused by electrostatic discharge;

6. To convert the discharge energy generated in the flammable mixture into heat energy;

7, the temperature of the combustible gas rises above the firing temperature;

8. The minimum energy that raises the temperature to the ignition temperature is called the minimum ignition energy; this value is used as a target value for explosion and fire.

Second, prevent static electricity countermeasures

1. The static electricity disaster is due to the generation of electric charge, the accumulation and discharge of electric charge;

2. Combustible substances occur under these four conditions;

3. Therefore, if one of these conditions is eliminated, disasters can be prevented;

4. It is important to accurately determine which of the four paragraphs should be suppressed;

5, and take appropriate countermeasures. As a basic measure to prevent static electricity;

The control of static electricity in the tape heat and cold shock box is not only for safety, but also to improve product quality. Haida equipment specializing in the production of peel strength testing machine, tape holding adhesive testing machine, welcome to inquire.

Article source: Dongguan Haida International Instruments without permission to prohibit reprint! (Or: if you need to reprint, indicate the source)