Most of the paint products are flammable and explosive. If the drum “target="_blank" href="http://sunxiwei.com/">the paint drum is not good, it is easy to leak and break, which not only causes serious pollution, but also easily causes dangerous events such as explosion.
Not only is the safety problem of plastic packaging barrels imminent, but also the environmental protection needs of the design process are improved.
In recent years, due to the unscientific design of paint packaging, it has caused some troubles and wastage of paint for consumers. There are mainly the following problems.
First, it is inconvenient to open. To open the paint seal, you must open it with a tool. If you cannot use a single-use seal, you will be unable to seal the dry paint because of the residual paint. This will prevent the remaining paint from being properly stored.
Second, it is inconvenient to paint outside.
The third reason is that it is impossible to fall into the net and cause waste. Today, regardless of the size of the paint package, the outlet portion will be pressed into a concave shape, forming a circle of iron skin inwards, due to the barrier of the iron skin, will always leave a small part of paint in the bucket can not be poured out, causing waste.
Fourth, there is no recycling of packaging, which increases the environmental pollution after use.
Paint bucket
Structural features:
1. There are unique multiple sealing points between the barrel and the lid to ensure that the fluid does not leak.
2. Reinforce the inner edge of the lid to ensure that the accumulated load is transferred to the stiffener.
3, the bottom of the barrel and the lid of the yin and yang are matched to ensure stable accumulation during storage and transportation.
4. There is a circle of torn circles on the lid to ensure that the lid is not lifted when dropped during transport.
5, anti-counterfeiting is good, you must tear off the ring to open the lid to ensure that the brand-name products are not counterfeit.
Instructions for use:
1. Place the empty bucket on a flat floor. Insert the handles on both sides of the bucket into the notches on the outside of the bucket body. Pull it hard or use a wooden hammer to knock it on.
2. Put the product in the barrel, put the lid on the barrel mouth, one hand grasps the edge of the barrel lid and the barrel body, and the other hand holds the wooden hammer head and strikes the other edge of the barrel body until it fully cooperates.
3, open, with a knife to tear the tear along the lid parallel to open the lid.
Paint packaging barrels have new requirements. Qingdao Mingwei Plastic Industry Co., Ltd. is a manufacturer of lubricant plastic buckets and packaging barrels. "Target="_blank" href="http://sunxiwei.com/">Paint coating barrel series, paint The company is a joint-stock company of plastic barrels, chemical barrels, and chemical barrels, etc. The company has advanced equipments and production processes, and the products strictly comply with the ISO9002 standard production and management, product quality, low price, good business Reputation wins the market, worth recommending.http://sunxiwei.com/ http://qdmingweisuye.com/