How do the wood furniture do the treatment of harmful gases? “Under the same conditions, the board with higher environmental performance must have less glue. If two pieces of the same volume are used, the environmental protection must ensure that the same tree species are used, and the plate particles are larger (because the large particles also represent contact). The face is large, the glue used is relatively small), the lighter weight (because it is the original taste and weight of the wood), and the relatively heavy piece is naturally formed by adding too much glue. Therefore, it is unreasonable for many consumers to judge the quality of the board by weight alone.
Paint warning to use engineering paint
Newly sent furniture, what are you most worried about? Perhaps many people will have the impression that the smell of new furniture is much stronger than the sample. Sometimes a new small wardrobe may make the whole room full of irritating smell. This is the VOC and formaldehyde in the paint. Waiting for harmful gases. Jia Baoli paints Shaanxi general agent Feng Jian to tell reporters that because the furniture has much higher requirements on the color, water resistance, saturation, transparency and adhesion than the wall coating, the traditional furniture painting must use paint. The chemical volatile components of the paint are more toxic and more volatile, which has become a serious carrier for the excessive consumption of harmful gases in the furniture. Nowadays, a well-recognized practice in the industry is to use water-based paint, which is mainly replaced by water of banana water. Water-based materials are non-toxic, while banana water is a well-known toxic chemical component; water-based materials volatilize only water, not chemical components, by which the harmful gases in the paint are resolved.
Of course, in recent years, many consumers choose to buy finished furniture in order to buy environmentally friendly products, but in fact some unscrupulous manufacturers use engineering paints for ordinary furniture in order to pursue profits, which is undoubtedly for consumers. Safety lays a huge hidden danger, so it is best to choose products with high brand credibility and high recognition when purchasing finished furniture.
Unit area superposition effect
The materials used are absolutely green and the paint used will not be a problem, but why is the final indoor air test still not up to standard? In the process of completing a new home dream, many people will have such confusion. Why can't qualified products bring qualified air quality? Li Zhiqiang, the director of engineering for urban people, said: “When consumers buy furniture or choose plates, they should consider the amount of space, paint usage, furniture usage and fabrics. The more materials used, the more likely it is. The greater the amount of harmful gas released in a unit area, the worse the environmental protection of indoor air. If a certain material is accumulated in a large area per unit area, it may cause excessive levels of harmful gases in the area. While fully considering the practicality, we must also minimize the amount of material used, so as to effectively control the release of harmful gases. If a large amount of materials must be used, the environmental performance of each material should be more stringent.
Acrylic Jars With Lids,Airless Eye Cream Bottle,Frosted Glass Cosmetic Bottle,Roll On Bottle
Shijiazhuang HuangJia Trading Co., Ltd , https://www.hj-cosmetic.com