Experimental principle of human ω-interferon (IFN-ω) ELISA Kit
1. The level of human interferon-IFN (IFN-ω) ELISA Kit in the specimen was determined by double antibody sandwich method.
2. First coat the microplate with purified human ω-interferon (IFN-ω) ELISA Kit antibody to make a solid phase antibody.
3. Then add ω-interferon (IFN-ω) ELISA Kit to the microwells coated with mAb in turn, and then combine with HRP-labeled ω-interferon (IFN-ω) ELISA Kitt antibody to form antibody-antigen-enzyme labeled antibody After thorough washing, the complex is added with substrate TMB for color development. TMB is converted into blue under the catalysis of HRP enzyme, and into the final yellow under the action of acid
4. The color depth is positively correlated with the IFN-ω ELISA Kit in the sample.
5. Finally, the absorbance (OD value) is measured with a microplate reader at a wavelength of 450 nm, and the concentration of human IFN-ω ELISA Kit in the sample is calculated by a standard curve.
Purpose of use: To determine the content of human IFN-ω ELISA Kit in human serum, plasma and related liquid samples.
5. Serum: The blood will naturally coagulate at room temperature for 10-20 minutes and centrifuge for about 20 minutes (2000-3000 rpm). Collect the supernatant carefully and centrifuge again if a precipitate appears during storage. Avoid any cell stimulation during the operation. Use test tubes free of pyrogens and endotoxins.
6. Plasma: EDTA or sodium citrate should be selected as the anticoagulant according to the requirements of the specimen. After mixing for 10-20 minutes, centrifuge for about 20 minutes (2000-3000 rpm) to remove particles. Collect the supernatant carefully, and centrifuge again if there is any precipitate.
safety:
1. Avoid direct contact with stop solution and substrate. If you accidentally come into contact with these liquids, please rinse them with water as soon as possible.
2. Do not eat, drink, smoke or use cosmetics during the experiment.
3. Do not touch any ingredients in the kit with your mouth.
4 Keep Elisa kit away from children
Bring your own items:
1. 37 ℃ incubator
2. Standard specification microplate reader
3. Precision pipette and disposable tip
4. Distilled water
5. Disposable test tube
6. Absorbent paper
Storage conditions and validity period:
1. Kit storage :; 2-8 ℃.
2. Validity: 6 months
Anomatic`s dedication to providing cost effective solutions to the metered-dose inhaler industry has resulted in the development of a unique plasma treatment process that significantly reduces the surface energy of the inside of the canister. Using ultra-pure monomers, the Anomatic system achieves a hydrophobic surface with a contact angle greater than 90 degrees. This helps to prevent the adhesion of the formulation to the canister wall
Plasma Coated Canisters,Quality Coated Canisters,Quality Plasma Coated Canisters,Plasma Surface Treatment Canisters
Anomatic(suzhou)metal packaging co,ltd , https://www.anomaticpharma.com