Model | JB-60100J |
Max. Printing size | 580×1000 |
Max. Screen size | 900×1400 |
Material Width | 150~600 |
Max. Dia of Feed roller |
Φ 500 |
Max. Dia of Collection roller |
Φ 500 |
Printing Speed (times/hour) |
1800 |
Substrate thickness | 0.07 ~ 0.38 |
Printer Power |
3P 380V 50Hz 2.7Kw |
Oven Power |
3P 380V 50Hz  13 Kw |
Gas | 5-7Kgs/cm2 |
Overall size of printing part |
6400×1370×1950 |
Overall size of oven | 2150×1200×1970 |
The purpose of washing hands is to remove stains and bacteria on the hands, so the washing force is the first thing to consider, but the washing force and degreasing force is proportional to the excellent decontamination with strong degreasing effect, should choose mild performance of non-stimulating surfactants.
Abundant and durable foam and easy rinsing is an important index of the quality of hand sanitizer products. Abundant and durable foam and easy rinsing can bring users a relaxed experience of washing hands without burden. Therefore, foaming and foam stabilization properties and easy rinsing should be given priority in the formulation design.Can remove bacteria, is the key to hand washing can achieve true cleanliness, is mainly used as hand sanitizer in public places.
First fully wet your hands with water, take appropriate amount of hand sanitizer in the palm of your hands fully rub at least 30 seconds, in this process should pay attention to the rub to the fingertips, fingers, and let the foam can cover all parts of the entire hand, after rubbing rinse with running water. Finally, be careful to use a clean dry towel or paper towel to dry, preferably not dry, because the rapid evaporation of surface water will cause the skin to lose water, resulting in dry skin, become rough.
Hand Wash,Hand Wash Liquid,Liquid Hand Soap
DONGGUAN VOLES COMMODITY CO., LTD , https://www.volescommodity.com